Note: |
In K. Sugihara's measurements, there is only one length per diameter and vice versa. Hence, there will not be any ellipse calculations possible. |
|
1 [value] | indicates the row is for Socket the Reed Well | |
2 [value] |
indicates the row is for bore beneath tenon. The length value at the top of the tenon has been taken from socket tenon page (see Socket and Tenon data) |
|
3 [value] | indicates linear interpolated data |
Measurement |
Ref- erence |
Length | Width | Notes |
Max. | at Max. | |||
Naust, P. Measurer: K. Sugihara |
Top | 1 0.00 | 8.80 | Top of Reed Well |
Top | 1 2.00 | 8.60 | ||
Top | 1 3.40 | 8.40 | ||
Top | 1 5.60 | 8.20 | ||
Top | 1 8.40 | 8.00 | ||
Top | 1 11.80 | 7.80 | ||
Top | 1 13.80 | 7.60 | ||
Top | 1 15.50 | 7.40 | ||
Top | 1 16.70 | 7.20 | ||
Top | 1 18.50 | 7.00 | ||
Top | 1 22.10 | 6.80 | ||
Top | 1 28.10 | 6.60 | ||
Top | 1 28.70 | 6.55 | ||
Top | 1 31.50 | 6.50 | ||
Top | 1 36.40 | 6.45 | ||
Top | 1 38.50 | 6.40 | ||
Top | 1 passes | 6.39 | Bottom of Reed Well | |
Bottom | 208.30 | 6.40 | ||
Bottom | 204.50 | 6.45 | ||
Bottom | 193.20 | 6.50 | ||
Bottom | 173.30 | 6.55 | ||
Bottom | 171.80 | 6.60 | ||
Bottom | 168.60 | 6.70 | ||
Bottom | 166.30 | 6.80 | ||
Bottom | 159.10 | 7.00 | ||
Bottom | 152.50 | 7.20 | ||
Bottom | 143.20 | 7.40 | ||
Bottom | 135.30 | 7.60 | ||
Bottom | 130.80 | 7.80 | ||
Bottom | 129.20 | 8.00 | ||
Bottom | 117.90 | 8.20 | ||
Bottom | 114.00 | 8.40 | ||
Bottom | 109.20 | 8.60 | ||
Bottom | 102.80 | 8.80 | ||
Bottom | 95.20 | 9.00 | ||
Bottom | 89.60 | 9.20 | ||
Bottom | 83.80 | 9.40 | ||
Bottom | 83.50 | 9.60 | ||
Bottom | 72.40 | 9.80 | ||
Bottom | 66.80 | 10.00 | ||
Bottom | 62.30 | 10.10 | ||
Bottom | 51.30 | 10.20 | ||
Bottom | 43.70 | 10.40 | ||
Bottom | 34.00 | 10.60 | ||
Bottom | 2 25.80 | 3 10.75 | Top of Tenon | |
Bottom | 2 22.80 | 10.80 | ||
Bottom | 2 9.80 | 11.00 | ||
Bottom | 2 4.40 | 11.20 | ||
Bottom | 2 0.60 | 11.40 | ||
Bottom | 2 0.00 | 0.00 | Bottom of Tenon |