| Hautboy by Thomas Lot: | Michel Piguet Nr. 07 | |
| Measurement by Mary Kirkpatrick |
Head Joint Bore Extended Data and Calculations |
| Head Joint Bore Data only | Middle Joint Bore Data | Tone Hole Angles & Undercutting |
Download this Page as Text (comma separated values) or as Excel Spreadsheet |
| Tone Hole Size & Position | Bell Joint Bore Data | Kirkpatrick Measurement Home | |
| View Notes (also click on footnote number) | View Column Heading Descriptions | ||
| Measurement |
Ref- erence |
Length | Ellipse Widths | Original Diameter | |||||
| x | y | Max. @ x | Min. @ x | Max. @ y | Min. @ y | est. @ x | est. @ y | ||
|
Lot, T. Measurer: Mary Kirkpatrick |
Top | 0 1.50 | 0 1.50 | 7.20 | |||||
| Top | 0 4.00 | 0 3.00 | 7.00 | 6.90 | 7.08 | 7.00 | 7.10 | 7.16 | |
| Top | 0 6.00 | 0 5.50 | 6.80 | 6.75 | 6.84 | 6.80 | 6.85 | 6.88 | |
| Top | 0 9.00 | 0 8.00 | 6.60 | 6.53 | 6.68 | 6.60 | 6.67 | 6.76 | |
| Top | 0 11.00 | 0 10.00 | 6.40 | 6.30 | 6.50 | 6.40 | 6.50 | 6.60 | |
| Top | 0 14.50 | 0 13.00 | 6.20 | 6.11 | 6.30 | 6.20 | 6.29 | 6.40 | |
| Top | 0 16.00 | 0 15.00 | 6.00 | 5.94 | 6.08 | 6.00 | 6.06 | 6.16 | |
| Top | 0 19.50 | 0 17.50 | 5.80 | 5.69 | 5.96 | 5.80 | 5.91 | 6.12 | |
| Top | 0 24.00 | 0 21.50 | 5.60 | 5.49 | 5.73 | 5.60 | 5.71 | 5.86 | |
| Top | 0 29.00 | 0 26.00 | 5.40 | 5.28 | 5.53 | 5.40 | 5.52 | 5.66 | |
| Top | passes | 0 28.50 | 5.30 | n/a | n/a | n/a | n/a | n/a | |
| Bottom | passes | 211.00 | 5.30 | n/a | n/a | n/a | n/a | n/a | |
| Bottom | 211.00 | 202.00 | 5.40 | 5.26 | 5.66 | 5.40 | 5.54 | 5.92 | |
| Bottom | 198.00 | 195.00 | 5.60 | 5.51 | 5.75 | 5.60 | 5.69 | 5.90 | |
| Bottom | 191.50 | 191.00 | 5.80 | 5.78 | 5.83 | 5.80 | 5.82 | 5.86 | |
| Bottom | 187.00 | 180.00 | 6.00 | 5.69 | 6.13 | 6.00 | 6.31 | 6.26 | |
| Bottom | 175.00 | 170.50 | 6.20 | 6.12 | 6.29 | 6.20 | 6.28 | 6.38 | |
| Bottom | 165.00 | 163.00 | 6.40 | 6.36 | 6.45 | 6.40 | 6.44 | 6.50 | |
| Bottom | 122.00 | 117.00 | 6.60 | 6.58 | 6.62 | 6.60 | 6.62 | 6.64 | |
| Bottom | 152.00 | 148.50 | 6.80 | 6.82 | 6.78 | 6.80 | 6.84 | 6.82 | |
| Bottom | 145.00 | 141.00 | 7.00 | 6.89 | 7.11 | 7.00 | 7.11 | 7.22 | |
| Bottom | 136.00 | 132.00 | 7.20 | 7.11 | 7.29 | 7.20 | 7.29 | 7.38 | |
| Bottom | 128.50 | 125.00 | 7.40 | 7.31 | 7.50 | 7.40 | 7.49 | 7.60 | |
| Bottom | 122.00 | 117.00 | 7.60 | 7.45 | 7.73 | 7.60 | 7.75 | 7.86 | |
| Bottom | 115.00 | 111.50 | 7.80 | 7.70 | 7.93 | 7.80 | 7.90 | 8.06 | |
| Bottom | 109.00 | 102.50 | 8.00 | 7.78 | 8.14 | 8.00 | 8.22 | 8.28 | |
| Bottom | 100.50 | 96.00 | 8.20 | 8.09 | 8.34 | 8.20 | 8.31 | 8.48 | |
| Bottom | 93.00 | 87.50 | 8.40 | 8.25 | 8.53 | 8.40 | 8.55 | 8.66 | |
| Bottom | 86.00 | 82.00 | 8.60 | 8.49 | 8.75 | 8.60 | 8.71 | 8.90 | |
| Bottom | 79.00 | 4 76.50 | 8.80 | 8.73 | 8.89 | 8.80 | 8.87 | 8.98 | |
| Bottom | 72.00 | 68.00 | 9.00 | 8.89 | 9.09 | 9.00 | 9.11 | 9.18 | |
| Bottom | 64.00 | 59.00 | 9.20 | 9.07 | 9.31 | 9.20 | 9.33 | 9.42 | |
| Bottom | 56.00 | 47.00 | 9.40 | 9.17 | 9.57 | 9.40 | 9.63 | 9.74 | |
| Bottom | 45.00 | 38.50 | 9.60 | 9.48 | 9.75 | 9.60 | 9.72 | 9.90 | |
| Bottom | 39.00 | 26.00 | 9.80 | 9.37 | 10.01 | 9.80 | 10.23 | 10.22 | |
| Bottom | 5 37.70 | 23 25.05 | 5 9.82 | 9.63 | 10.09 | 9.82 | 10.01 | 10.36 | |
| Bottom | 26.00 | 2 16.50 | 10.00 | 9.85 | 10.20 | 10.00 | 10.15 | 10.40 | |
| Bottom | 23 25.05 | 25 15.75 | 5 10.02 | 9.79 | 10.31 | 10.02 | 10.25 | 10.60 | |
| Bottom | 2 14.00 | 2 7.00 | 10.20 | 10.09 | 10.34 | 10.20 | 10.31 | 10.48 | |
| Bottom | 2 6.00 | 2 3.00 | 10.40 | 10.32 | 10.55 | 10.40 | 10.48 | 10.70 | |
| Bottom | 2 2.00 | 2 1.00 | 10.60 | 10.55 | 10.70 | 10.60 | 10.65 | 10.80 | |
| Bottom | 2 0.00 | passes | 10.80 | n/a | n/a | n/a | n/a | n/a | |
| Note: | [value] | Numbers in boldface are taken directly from the drawing. |
| 0 [value] | Indicates the row is for Reed Well / Counterbore | |
| 0 [value] | The second length to diameter for a row under the reed well where both distances are the same | |
| 2 [value] | Indicates the row is for bore beneath tenon. | |
| 2 [value] | If the length value for the bore beneath a tenon has been derived or calculated | |
| 3 [value] | The length value at the top of the tenon has been taken from socket tenon page (see Socket and Tenon data) | |
| 4 [value] | Indicates presence of a tone hole and the length value may have been affected by it. | |
| 5 [value] | Indicates linear interpolated data | |
| [value] | Indicates derived/calculated information. | |
|
An empty shaded cell indicates that, since the measured lengths are the same, the values that would appear are redundant. |
| Last Updated on 31 may 2002 | Copyright © Carl Burmeister, 2001-2002 |
| You may freely distribute the textual parts of this work provided that it is unaltered and that no charge is made and this copyright notice is retained. | |
| All rights to the contents of named author's material are retained by them. | |
|
These pages are provided as is. While every effort is being made to provide accurate information. these pages may contain inaccuracies due to the author's unintentional misreading of the materials. Please send corrections and comments to webmaster@hautbois.net |
|