| Hautboy by Thomas Lot | Michel Piguet Nr. 07 | |
| Measurement by Mary Kirkpatrick |
Tone Hole Size and Position |
| Head Joint Bore Data | Middle Joint Bore Data | Tone Hole Angles & Undercutting |
Download this Page as Text (comma separated values) or as Excel Spreadsheet |
| Bell Joint Bore Data | Kirkpatrick Measurement Home | ||
| View Notes (also click on footnote number) | View Column Heading Descriptions | ||
| Measurement |
Joint Type |
Hole ID |
Ref- erence |
Distance from | Hole Diameter | Diameter |
Hole Depth |
Notes | |||
| edge | center | y | x | Bore | Body | ||||||
|
Lot, T. Measurer: Mary Kirkpatrick |
head | 1 | Top | 1 142.50 | 2 143.88 | 2.75 | 3.00 | 3 tbd | tbd | 17.30 | tbd |
| Tenon | 1 80.75 | 2 82.13 | |||||||||
| Bottom | 1 105.80 | 2 107.18 | |||||||||
| 2 | Top | 1 176.58 | 2 178.10 | 3.05 | 3.05 | 3 tbd | tbd | 18.15 | tbd | ||
| Tenon | 1 47.85 | 2 49.38 | |||||||||
| Bottom | 1 72.90 | 2 74.43 | |||||||||
| 3-L | Top | 1 209.05 | 2 210.20 | 2.30 | 2.35 | 3 tbd | tbd | 19.65 | tbd | ||
| Tenon | 1 15.75 | 2 16.90 | |||||||||
| Bottom | 1 40.80 | 2 43.10 | |||||||||
| 3-R | Top | 1 209.38 | 2 210.50 | 2.25 | 2.35 | 3 tbd | tbd | 19.65 | tbd | ||
| Tenon | 1 15.45 | 2 16.58 | |||||||||
| Bottom | 1 40.50 | 2 42.75 | |||||||||
| middle | 4-L | Top | 1 47.30 | 2 49.05 | 3.50 | 3.40 | 3 tbd | tbd | 20.80 | tbd | |
| Bottom | 1 203.25 | 2 205.00 | |||||||||
| 4-R | Top | 1 47.50 | 2 49.18 | 3.35 | 3.40 | 3 tbd | tbd | 20.80 | tbd | ||
| Bottom | 1 203.05 | 2 204.73 | |||||||||
| 5 | Top | 1 79.40 | 2 81.83 | 4.85 | 4.75 | 3 tbd | tbd | 21.35 | tbd | ||
| Bottom | 1 171.15 | 2 173.58 | |||||||||
| 6 | Top | 1 113.00 | 2 115.28 | 4.55 | 4.75 | 3 tbd | tbd | 22.00 | tbd | ||
| Bottom | 1 137.55 | 2 139.83 | |||||||||
| Eb | Top | 1 176.75 | 2 179.95 | 6.40 | 6.35 | 3 tbd | tbd | 23.50 | tbd | ||
| Tenon | 1 53.30 | 2 56.50 | |||||||||
| Bottom | 1 80.20 | 2 86.60 | |||||||||
| C | Bottom | 1 213.85 | 2 218.25 | 8.80 | 8.60 | 3 tbd | tbd | 24.70 | tbd | ||
| Tenon | 1 18.95 | 2 23.35 | |||||||||
| Bottom | 1 45.50 | 2 54.30 | |||||||||
| bell | T-L | Top | 1 45.70 | 2 48.13 | 4.85 | 4.85 | 3 tbd | 3.00 | tbd | tbd | |
| T-R | Top | 1 45.65 | 2 48.10 | 4.90 | 4.95 | 3 tbd | 3.00 | tbd | tbd | ||
| Note: | Distances to tone hole are presented from both center and edge. Numbers in boldface are taken directly from the drawing. | |
| [value] | Numbers in boldface are taken directly from the drawing. | |
| 1 [value] |
Distances to tone hole are from the edge. If the distance is to the top, the top edge is the starting point; if bottom or tenon, the bottom edge is used. |
|
| 1 [value] | The value has been altered for a reference different than that provided in the drawing. | |
| 2 [value] |
Indicates Tone Hole measured distances have been adjusted to be from the reference (top, tenon or bottom) to center of hole. |
|
| 3 [value] | Indicates linear interpolated data. | |
| [value] | indicates derived/calculated information otherwise devised. | |
| n/r | Indicates data not recorded | |
| tbd | to be determined, i.e. references and/or interpolations have yet to be worked out, | |
| Last Updated on 30 may 2002 | Copyright © Carl Burmeister, 2001-2002 |
| You may freely distribute the textual parts of this work provided that it is unaltered and that no charge is made and this copyright notice is retained. | |
| All rights to the contents of named author's material are retained by them. | |
|
These pages are provided as is. While every effort is being made to provide accurate information. these pages may contain inaccuracies due to the author's unintentional misreading of the materials. Please send corrections and comments to webmaster@hautbois.net |
|